Bat Mobile How To
Gather scissors, glue or a glue stick, and thread. Cut out the holder, piece 1.
Fold the holder along the dotted lines.
Glue the two halves together and snip the white line at the end of the holder.
Cut a long length of thread, about a foot. Tie one end to the end of the holder, securing it in the notch you cut during the previous step.
Cut out the middle holder, piece 2. Fold along the dotted line.
Glue the middle holder about two inches below the top holder. Snip the four white lines.
Cut out two moths, pieces M1 and M2.
Fold the two moth pieces. Cut two lengths of thread and tie each one to the inner notches. Glue the moths about 1.25 inches from the middle holder and snip off remaining thread.
Cut out two bats, pieces B1 and B2.
Fold the two bat pieces. Cut two lengths of thread and tie each one to the outer notches. Glue the bats about 2 inches from the middle holder and snip off remaining thread.
Cut out the bottom holder, piece 3. Fold along the dotted line and glue it about 2.5 inches from the middle holder. Snip the two white lines.
Cut out the last two bat pieces. Cut two lengths of thread and tie each one to the notches. Glue the bats about 1 inch from the bottom holder and snip off remaining thread. Cut out the last moth, fold it, and glue it about 1.5 inches from the bottom holder. Snip off the remaining thread.
